Airfields / England / EGNJ

Humberside (EGNJ) radio calls

Service
ATC
You call it
Humberside Tower
Elevation
121 ft

Frequencies

ServiceFrequency
Approach119.130
Tower124.905

These frequencies have been checked by hand. Always confirm against the current AIP before flight.

Radio calls at Humberside

Humberside has an air traffic control unit, so you are given clearances and instructions, and the mandatory items are read back in full.

  1. Taxi

    Humberside Tower 124.905

    Humberside Tower, G-ABCD, Cessna 152 at the flying club with information Alpha, request taxi.

    G-ABCD, taxi to holding point Alpha for runway zero two, QNH one zero one five.

    Taxi instructions, the runway in use and the pressure setting are all mandatory readbacks.

  2. Readback

    124.905

    Taxi to holding point Alpha runway zero two, QNH one zero one five, G-CD.

    Read back what must be read back, and include your callsign — CAP 413 says a readback always carries it.

  3. Departure

    Humberside Tower 124.905

    G-CD, ready for departure.

    G-CD, runway zero two, cleared for take-off, surface wind two four zero degrees eight knots.

  4. Downwind

    Humberside Tower 124.905

    G-CD, downwind.

    G-CD, report final.

    “Report final” is an instruction, so the answer is “Wilco”, never “Roger”.

  5. Final and landing

    Humberside Tower 124.905

    G-CD, final.

    G-CD, runway zero two, cleared to land, surface wind two four zero degrees eight knots.

    A landing clearance is read back in full.

  6. Vacating

    Humberside Tower 124.905

    G-CD, runway vacated.

    G-CD, taxi to the apron.

Practise these calls at EGNJ

Nearby airfields

Frequencies and procedures on this page are for training. Always check the current UK AIP and NOTAMs before flight. TowerTalk is a training aid and is not approved or endorsed by the CAA.